|2001 Toyota Tacoma SR5 V6. It had all options when purchased new in 2001 including the sunroof. It has approximately 25" of lift to clear the 46" tires.
The truck was completed by Jason at KatKustoms in NewKnoxville Ohio. Additional pictures can be seen at his website www.katkustoms.com. Front & rear 3-link suspension on 16" travel king coilovers for smooth ride. The subframe and links are made of .120 and .250 wall DOM for strength. Front & rear sway bars using DOM and heim joints down to trussed & smoothed D60 axle housings. The axles were custom built units from Custom Differentials that used new 1 ton Ford D60 center housings (front axle uses Chevy outer knuckles) cut down to 65" WMS-WMS with disk brakes with 6 X 6.5 bolt patters. Both axles have lock right lockers and 5.38 gears installed. PSC Hydraulic steering system, including the high flow pump, to steer Mickey Thompson 46x19.5/16.5 tires on 16.5X14 Weld Scorpion wheels. The steering is a Z linked steering system designed by KatKustoms.com and provides no binding or bump steer throughout the full suspension travel. The 4-wheel drive uses Tom Woods driveline shafts mated to Dana 24 divorce mounted transfer case. A custom machined rotor is matted to the rear output of the transfer case and used as the driveline emergency brake. It will hold great at extreme angles. Every suspension part is painted red or chrome plated. The engine is the stock 3.4L V6 with AFE intake, JBA headers, magnaflow high flow converter, Gibson muffler and the entire exhaust is jet hot coated. The frame was smoothed and painted Toyota silver prior to reassembly.
Body mods include a custom cowl hood, bushwhacker cutout fender flares, shaved tailgate handle, snugtop carpeted bedcover, custom 26 gallon fuel cell recessed in the bed and AFE bed cover. Both the tailgate and cover are connected to linear actuators and operated with a remote. Front grill and bumper also have been updated to include billet inserts.
The interior includes miscellaneous billet pieces for the vents, power window switch covers and several other pieces. I have an A pillar gauge pod but have not installed any gauges in it yet. The head unit is a Pioneer unit with a motorized 7" TV. Many of the enterior trim pieces are painted to match the exterior color.
The truck drives and handles good on the road. It is not a caddy but it is easy to drive once you get used to it. It has won awards in every show entered including best of show, best engineering etc. The truck was also filmed with ESPN 2 mothers car show in Lima Ohio. I may accept a trade for the right vehicle. I am asking $17,000 firm. Must go with no trades. Cash only.